Thermoprobe TL2 Manuel d'utilisateur télécharger pdf (Page 10)

02/2013, JK

Using Hyperterminal:

You can use Hyperterminal to receive temperature data from the TL2.

Click "start" -> "Accessories" -> "Communications" -> "HyperTerminal"

Click "File"->"New Connection"

Give the connection a name and click "OK"

Select the Com Port for the TL2 and click "OK"

NOTE: See ‘Finding Com Port Section’ if you don’t know which com port to select.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Thermoprobe TL2 Manuel d'utilisateur Page 10